Step 3 Open HyperTerminal and set the following parameters:
l Bits per second: 115200
l Data bits: 8
l Parity: None
l Stop bits: 1
l Flow control: None
Figure 14-7 shows the port settings.
Figure 14-7 HyperTerminal Properties
Step 4 Click Apply.
Step 5 Enter the user name and password to access the CLI.
----End
14.4 Logging In to the Server Using the IRC
The independent remote console (IRC) is a tool developed based on the Huawei server
management software iBMC. You can use this tool to remotely access and manage the server,
without worrying about browser and JRE compatibility.
Windows
The following Windows versions are supported:
2288H V5 Server
User Guide
14 Common Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 264
To Next Page
Loading...
Need help?
General