Figure 5-30 Installing a fan module
Step 15 Install the air duct or the built-in drive assembly. For details, see 3.9 Installing the Air Duct
or 3.11 Installing the Built-in Drive Assembly.
Step 16 Install the chassis cover. For details, see 3.5 Installing the Chassis Cover.
Step 17 Install the server. For details, see 4.4 Installing the Server on Guide Rails.
Step 18 Connect the power cables. For details, see 5.4 PSU.
Step 19 Power on the server. For details, see 3.1 Powering On the Server.
----End
5.7 Built-in USB Flash Drive
The built-in USB flash drive can be installed only in servers with 12 or 25 drives. For servers
with 8 and 24 drives, the USB flash drive can be installed in the USB 3.0 port on the front
panel.
To install the built-in USB flash drive, perform the following steps:
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
Need help?
General