Huawei OceanStor 5300 V3 User Manual

Step 2 Choose Data Protection > HyperMetro > HyperMetro vStore Pair.
Step 3 Click Create.
The Create HyperMetro vStore Pair dialog box is displayed.
Step 4 Set the properties for the HyperMetro vStore pair. Table 4-20 describes related parameters.
Table 4-20 HyperMetro vStore pair parameters
Parameter
Description
HyperMetro Domain Name of a HyperMetro domain.
Local vStore Name of a local vStore.
Remote vStore Name of a remote vStore.
Step 5 Click Automatically Added to Pair List or Manually Added to Pair List.
Step 6 Set the properties for the preferred site setting mode. Table 4-21 describes related parameters.
Table 4-21 Preferred site setting mode parameters
Parameter
Description
Along with active The system will identify the activation
states of local and remote sites, and specify
the active site as the preferred site.
Local Specify the local storage system as the
preferred site.
Remote Specify the remote storage system as the
preferred site.
Step 7 Confirm the operation to create a HyperMetro vStore pair.
1. Click OK.
The Warning dialog box is displayed.
2. Confirm the information in the dialog box and select I have read and understood the
consequences associated with performing this operation.
3. Click OK.
The Execution Result dialog box is displayed.
4. Click Close. The HyperMetro vStore pair is successfully created.
----End
4.6.6 Creating a NAS HyperMetro Pair
After specifying a HyperMetro domain (including local and remote devices and a quorum
server), device resources at two storage arrays, and data synchronization properties, you can
create HyperMetro relationships for devices at the two storage arrays. After the HyperMetro
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123

Huawei OceanStor 5300 V3 Specifications

General

Brand	Huawei
Model	OceanStor 5300 V3
Category	Storage
Language	English