4 Configuration
About This Chapter
This chapter describes how to configure HyperMetro, including configuration preparations,
process, and procedures.
4.1 Configuration Process
Before configuring HyperMetro, you must know the configuration process to ensure smooth
operations.
4.2 Configuration Preparations
This section describes prerequisites and documents that you must prepare before you
configure HyperMetro.
4.3 Configuring Switch
This section describes the configuration requirements of core switches and access switches at
the network layer and configuration procedure of the Fibre Channel switches at the storage
layer.
4.4 Configure Quorum Server Software
This section describes how to configure the quorum server software. Quorum server software
needs to be configured only when a quorum server is used for HyperMetro.
4.5 Configuring Basic Storage Services
This section describes how to configure basic storage services for the HyperMetro solution.
4.6 Creating NAS HyperMetro
This chapter describes how to create a NAS HyperMetro.
4.7 Verifying the Configuration
After configured, you can view the status of the data on the local and remote storage systems
to check whether HyperMetro between the local and remote storage systems is successful.
4.1 Configuration Process
Before configuring HyperMetro, you must know the configuration process to ensure smooth
operations.
Figure 4-1 shows the configuration process of HyperMetro.
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59
To Next Page
Loading...
Need help?
General