Table 5-10 Quorum server link parameters
Parameter Description
Controller Controller of a local device connecting to a
quorum server.
Port Controller port of a local device connecting
to a quorum server.
IP Address The IP address of a quorum server.
Running Status Running status of a link.
----End
5.1.4.2 Modifying Quorum Server Information
Through this operation, you can modify the properties of a quorum server and authentication
information for connecting the quorum server.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > Quorum Server.
Step 3 Select a quorum server that you want to modify and click Properties.
The Quorum Server Properties dialog box is displayed.
Step 4 On the General and Settings tab pages, modify the quorum server information. Table 5-11
explains the related parameters.
Table 5-11 Quorum server parameters
Parameter
Description Example Value
Name Name of a quorum server. [Example]
QuorumServer_001
Description Description of a quorum
server.
[Example]
None
Active IP Address Primary IP address of a
quorum server.
[Example]
192.168.0.1
Primary Port Primary port ID of a quorum
server. The default port ID is
30002.
NOTE
The port ID ranges from 1 to
65535.
[Example]
30002
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155
To Next Page
Loading...
Need help?
General