5.1.2 Managing HyperMetro Domains
By managing HyperMetro domains, you can modify quorum servers configured in
HyperMetro domains, and delete unnecessary HyperMetro domains as required.
5.1.2.1 Viewing HyperMetro Domain Information
Through this operation, you can view remote device and quorum server information in a
HyperMetro domain, and monitor the operating status of the HyperMetro domain.
Prerequisites
A HyperMetro domain has been successfully configured for the storage system.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > HyperMetro Domain.
Step 3 View the basic information about a HyperMetro domain. Table 5-5 explains the related
parameters.
Table 5-5 HyperMetro domain parameters
Parameter
Description
ID ID of a HyperMetro domain.
Name Name of a HyperMetro domain.
Running Status Running status of a HyperMetro domain.
Remote Device Remote device in a HyperMetro domain.
Quorum Mode Quorum mode of a quorum server.
NOTE
The Quorum Mode is Static Priority if no
quorum server is created.
Quorum Server Quorum server in a HyperMetro domain.
NOTE
When two quorum servers are configured in
V300R006C10 and later versions, information
about both will be displayed.
----End
5.1.2.2 Modifying a HyperMetro Domain
When a quorum server in a HyperMetro domain has been modified, you can modify the
HyperMetro domain to modify the quorum server in the domain.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
143
To Next Page
Loading...
Need help?
General