2. Optional: Select Daily and set Hours and execution start time. For example, if Hours:
01:00 and 17:00 are specified, and Minute: 1 is specified, then timing snapshot will be
executed at 01:01 and 17:01 every day.
3. Optional: Select Weekly and set Week and execution start time. For example, if Week:
Day 3, and Time: 11:50 is specified, then timing snapshot will be executed at 11:50 on
Sunday and Wednesday every week.
4. Optional: Select Monthly and set Date and execution start time. For example, if Date:
2 and 30 are specified, and Time: 12:10 is specified, then timing snapshot will be
executed at 12:10 on dates 2 and 30 every month.
Step 6 Click OK.
----End
4.7 Verifying the Configuration
After configured, you can view the status of the data on the local and remote storage systems
to check whether HyperMetro between the local and remote storage systems is successful.
After the HyperMetro configuration is complete, synchronize the HyperMetro pair. If Pair
Running Status is Normal after the synchronization, HyperMetro has been configured
successfully.
To verify the reliability and business continuity–related functions of HyperMetro, see section
Acceptance of HyperMetro in the Acceptance Test Guide of the corresponding product
model.
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
To Next Page
Loading...
Need help?
General