Parameter Description Example Value
Isolation Switch After the Isolation Switch
is turned on, the system will
suspend the HyperMetro
pair when the difference
between the write I/O
latency of the two storage
arrays is greater than the
isolation switch. The storage
array with the longer write
I/O latency will stop
providing services.
[Example]
Disabled
Isolation Threshold (ms) Write I/O latency difference
between the host and
HyperMetro storage arrays.
[Example]
500
----End
5.1.3.3 Synchronizing a HyperMetro Pair
Through this operation, ensuring data consistency between the storage arrays in two data
centers.
Prerequisites
The running status of a HyperMetro pair must be Paused, To be synchronized, or Force
Start (The connection of devices is normal).
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > HyperMetro Pair.
Step 3 Click the HyperMetro Pair tab.
The HyperMetro Pair management page is displayed.
Step 4 Right-click a HyperMetro pair whose data you want to synchronize and choose Synchronize
from the short-cut menu.
The security alert dialog box is displayed.
Step 5 Confirm the operation to synchronize data in the HyperMetro pair.
1. Confirm the information in the dialog box and select I have read and understand the
consequences associated with performing this operation.. Then click OK.
The Success dialog box is displayed, indicating that the operation succeeded.
2. Click OK.
----End
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
152
To Next Page
Loading...
Need help?
General