The security alert dialog box is displayed.
Step 4 Optional: Select Only delete the configuration information about the local device if the
HyperMetro pair fails or the remote device is disconnected. based on site requirements.
NOTE
If you do not select this option, you cannot delete the HyperMetro domain when the local device is
disconnected from the remote device.
Step 5 Select I have read and understand the consequences associated with performing this
operation. and click OK.
Step 6 The Execution Result dialog box is displayed indicating that the operation succeeded.
NOTE
After deleting a HyperMetro pair, scan for storage resources on the host to ensure that the host can correctly
identify the storage resources mapped to it.
----End
5.1.4 Managing Quorum Servers
By managing quorum servers, you can create and delete quorum servers, and add links for
quorum servers.
5.1.4.1 Viewing Quorum Server Information
Through this operation, you can view information about existing quorum servers as well as
links of the quorum server.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > HyperMetro > Quorum Server.
Step 3 View information about existing quorum servers. Table 5-9 describes related parameters.
Table 5-9 Quorum server parameters
Parameter
Description
Name Name of a quorum server.
Active IP Address Primary IP address of a quorum server.
Standby IP Address Standby IP address of a quorum server.
Running Status Running status of a quorum server.
Step 4 Select a quorum server and view its link information in the lower area. Table 5-10 describes
related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
154
To Next Page
Loading...
Need help?
General