No. Configuration
Procedure
Description Operation Location
5 Configuration
steps include:
1. Check the
license file.
2. Add a remote
device.
3. Add the
quorum server.
4. Create a
HyperMetro
domain.
5. Create a
HyperMetro
tenant pair.
6. Create a NAS
HyperMetro
pair.
7. (Optional)
Create a Qtree.
8. (Optional)
Create a quota.
9. (Optional)
Create a
snapshot.
Describes how to check
the HyperMetro license,
add a remote device and
quorum server, and
create a HyperMetro
domain, HyperMetro
tenant pair, and NAS
HyperMetro pair.
1. Check the license file. This
operation is performed on both
the local and remote storage
arrays.
2. Add a remote device. This
operation is performed on the
local storage array.
3. Add the quorum server. This
operation is performed on both
the local and remote storage
arrays.
4. Create a HyperMetro domain.
This operation is performed on
the local storage array.
5. Create a HyperMetro tenant
pair. This operation is
performed on the local storage
array.
6. Create a NAS HyperMetro
pair. This operation is
performed on the local storage
array.
7. Create a Qtree. This operation
is performed on the local
storage array.
8. Create a quota. This operation
is performed on the local
storage array.
9. Create a snapshot. This
operation is performed on both
the local and remote storage
arrays.
4.2 Configuration Preparations
This section describes prerequisites and documents that you must prepare before you
configure HyperMetro.
Prerequisites for configuring HyperMetro are as follows:
l All devices have been installed.
l The IP/Fibre Channel network is working properly between the two data centers.
l Storage units have been deployed at a third-place quorum site.
l If other features besides HyperMetro need to be configured for the storage system, see
the Impact and Restrictions section about the interaction among features.
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64
To Next Page
Loading...
Need help?
General