Table 5-4 HyperMetro vStore pair detailed parameters
Parameter Description
vStore Pair Running Status: The value can be Normal,
Unsynchronized, Force Start and Invalid.
Configuration: The value can be Normal, To Be
Synchronized and Synchronizing.
Logical Port Health Status Check Results: The value can be OK, The
primary LIF port of the primary end fails, The primary
LIF port of the secondary end fails and Unknown.
Configuration Check Results: The value can be OK, Subnet
masks of logical ports at two ends are inconsistent., IP
addresses of primary and secondary ends are
inconsistent., LIF roles of primary and secondary ends
are inconsistent., Types of current LIF ports at primary
and secondary ends are inconsistent., VLAN IDs of
current LIF ports at primary and secondary ends are
inconsistent., Gateways of logical ports at two ends are
inconsistent., Failback modes of logical ports at two ends
are inconsistent, Failover switches of logical ports at two
ends are inconsistent. and Unknown.
File System Health Status Check Results: The value can be OK, The
primary vStore contains faulty file systems, The
secondary vStore contains faulty file systems and
Unknown.
Configuration Check Results: The value can be OK, The
primary vStore contains file systems not configured with
HyperMetro (not recommended), The secondary vStore
contains file systems not configured with HyperMetro
(not recommended), File system capacities at primary
and secondary ends are inconsistent (not recommended),
File system names at primary and secondary ends are
inconsistent (not recommended), and Unknown.
----End
5.1.1.3 Deleting a HyperMetro vStore Pair
This operation deletes an existing HyperMetro vStore pair to save resources if you need to re-
establish the HyperMetro vStore pair between different vStores.
Prerequisites
l The storage devices work normally and correctly communicate with each other.
Configurations can be properly delivered.
l The status of the HyperMetro vStore pair is Normal.
l No NAS HyperMetro pair is configured for the vStores in the HyperMetro vStore pair.
l If the HyperMetro vStore pair works in quorum server mode, the quorum servers are
normal and properly communicate with storage devices.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
139
To Next Page
Loading...
Need help?
General