The Execution Result dialog box is displayed indicating that the operation is succeeded.
2. Click OK.
----End
5.2.4 Suspending a HyperMetro Pair
If you need to stop service for one site due to site failure or other reasons, select the
corresponding site of the HyperMetro pair. Pausing may cause the data inconsistency on both
sites.
Prerequisites
The Running Status of HyperMetro pair is Normal or Synchronizing (The connection of
devices is normal).
The HyperMetro pair is not added to the HyperMetro consistency group.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Go to the NAS HyperMetro page.
The operation path varies with user types:
l System user: Click
vStore, select the desired vStore, and click Details to go to the
vStore view. Choose Data Protection > HyperMetro.
l vStore user: In the vStore view, choose Data Protection > HyperMetro.
Step 3 Right-click the HyperMetro pair to be suspended and choose Pause from the shortcut menu.
Step 4 Select Preferred or Non-Preferred site and click OK.
The Warning dialog box is displayed.
Step 5 Confirm the operation to suspend the HyperMetro pair.
1. Confirm the information in the dialog box and click OK.
The Execution Result dialog box is displayed indicating that the operation succeeded.
2. Click Close.
NOTE
After the HyperMetro pair is suspended, data synchronization between the local and remote sites in the
pair is also suspended.
----End
5.2.5 Deleting a HyperMetro Pair
If a HyperMetro is no longer needed, you can delete it.
Prerequisites
Only when Pair Running Status is Paused, Force Start or To be synchronized, you can
delete the HyperMetro pair.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
170
To Next Page
Loading...
Need help?
General