Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 7 Management of Configuration Files
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-3
display saved-configuration [ last ]
The basic configuration of the router is displayed.
Using the display saved-configuration last command, you can view the configuration files
saved during in the previous startup. That is, the configuration files of the current startup are
displayed.
7.2.2 Viewing the Current Configuration
Do as follows on the router:
Run:
display current-configuration [ configuration [ configuration-type ] | controller |
interface interface-type [ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
The current configuration of the router is displayed.
7.2.3 Viewing the Running Configuration in the Current View
Do as follows on the router:
Run:
display this
The running configuration in the current view is displayed.
z
The configuration file is displayed in the same form as the saved file.
z
The display this interface command can only be executed in the interface view.
7.3 Saving the Current Configuration
Do as follows on the router:
Run:
save [ configuration-file ]
The current configuration is saved.
7.4 Clearing the Running Information
Do as follows on the router:
Run:
reset saved-configuration
The configuration file in the storage devices is cleared.
To Next Page
Need help?
General
