8 FTP, TFTP and XModem
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
8-12 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
8.5 Configuring TFTP
8.5.1 Establishing the Configuration Task
Applicable Environment
Configure TFTP to transfer files between the server and the client in a simple interaction
environment.
Pre-configuration Tasks
Before configuring TFTP, complete the following tasks:
z
Powering on the router
z
Connecting the TFTP client with the server
Data Preparation
To configure TFTP, you need the following data.
No. Data
1 IP address of the TFTP server
2 Name of the specific file in the TFTP server
3 File directory
4 ACL number
Configuration Procedures
No. Procedure
1 Downloading Files Through TFTP
2 Uploading Files Through TFTP
8.5.2 Downloading Files Through TFTP
Do as follows on the router that serves as the TFTP client:
Run the following commands according to different types of the server IP address.
z
When the server IP address is in IPv4 format, run:
tftp tftp-server get source-filename [ destination-filename ]
The router is configured to download files through TFTP.
z
When the server IP address is in IPv6 format, run:
To Next Page
Loading...
Need help?
General
