Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 2 Establishment of the Configuration Environment
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-9
Figure 2-3 Setting the port
Figure 2-4 Setting the port communication parameters
Power on the router to perform a self-check and the system performs automatic configuration.
When the self-check ends, you are prompted to press Enter until a command line prompt
such as
Quidway appears.
Enter the command to check the running status of the router or configure the router.
Enter "?" for help.
To Next Page
Loading...
Need help?
General
