Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 5 User Management
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-7
The stop bit is set.
Step 7 Run:
databits { 5 | 6 | 7 | 8 }
The data bit is set.
----End
5.2.4 Setting Terminal Attributes
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
Shell
The terminal service is started.
Step 4 Run:
idle-timeout minutes [ seconds ]
The timeout period is set.
Step 5 Run:
screen-length screen-length
One-screen length of the terminal screen is set.
Step 6 Run:
history-command max-size size-value
The buffer of the history command is set.
----End
5.2.5 Configuring the User Interface Priority
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
To Next Page
Loading...
Need help?
General
