Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 8 FTP, TFTP and XModem
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-5
The AAA view is displayed.
Step 3 Run:
local-user user-name password { simple | cipher } password
The local username and the password are configured.
----End
8.2.5 Configuring Service Types and Authorization Information
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
local-user user-name service-type ftp
The FTP service type is configured.
Step 3 Run:
local-user user-name ftp-directory directory
The authorized directory of the FTP user is configured.
----End
8.2.6 Checking the Configuration
Action Command
Check the configuration and
running information of the FTP
server.
display ftp-server
Check the login FTP user.
display ftp-users
Run the display ftp-server command. If the configuration and the status of the FTP server are
displayed, it means that the configuration succeeds.
<Quidway> display ftp-server
FTP server is running
Max user number 5
User count 1
Timeout value(in minute) 30
Acl number 0
Run the display ftp-users command. If the information of the login FTP users is displayed, it
means that the configuration succeeds.
To Next Page
Loading...
Need help?
General
