Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 5 User Management
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-15
5.4 Configuring the Local User Management
5.4.1 Establishing the Configuration Task
Applicable Environment
You can create and manage the separate local user on the broadband access server.
Pre-configuration Tasks
None
Data Preparation
To configure the local user management, you need the following data:
No. Data
1 Username and password
2 Service type of the local user
3 FTP directory of the local user
4 The status of the local user
5 The maximum number of accessing local users
Configuration Procedures
No. Procedure
1 Creating the Local User Account
2 Configuring the Service Type of the Local User
3 Configuring FTP Directory Authority of the Local User
4 Configuring the Local User Status
5 Configuring the Local User Priority
6 Configuring the Access Restriction of the Local User
7 Checking the Configuration
5.4.2 Creating the Local User Account
Do as follows on the broadband access router:
Step 1 Run:
system-view
To Next Page
Loading...
Need help?
General
