8 FTP, TFTP and XModem
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
8-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
<Quidway> display ftp-users
Username host port idle topdir
huawei 100.2.150.211 4641 0 flash:
8.3 Configuring FTP ACL
8.3.1 Establishing the Configuration Task
Applicable Environment
Configure FTP to transfer files between the FTP client and the remote server.
When the router serves as the FTP server, for security, you can configure the router by ACL to
be accessed by only those clients that satisfy the matching conditions.
Pre-configuration Tasks
Before configuring FTP, complete the following tasks:
z
Powering on the router
z
Connecting the FTP client with the server
Data Preparation
To configure FTP, you need the following data.
No. Data
1 FTP username and password
2 The file directory authorized to the FTP user
3 The timeout time of the FTP server
Configuration Procedures
No. Procedure
1 Enabling the FTP Server
2 Configuring the Basic ACL
3 Configuring the Basic FTP ACL
8.3.2 Enabling the FTP Server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
To Next Page
Loading...
Need help?
General
