3 CLI Overview
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
3-10 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
Key Function
Tab Press Tab after typing the incomplete key word and the
system runs the partial help:
z
If the matching key word is unique, the system replaces the
typed one with the complete key word and displays it in a
new line with the cursor a space behind.
z
If there are several matches or no match at all, the system
displays the prefix first. Then you can press Tab to view
the matching key word one by one. In this case, the cursor
is closely following the word end and you can type a space
to enter the next word.
z
If a wrong key word is typed in, press Tab and your input
is displayed in a new line.
3.7 Displaying Characteristics
The command line interface provides the following displaying characteristics:
z
To facilitate users, the prompt and help information can be displayed in both Chinese and
English.
z
When the information displayed exceeds a full screen, it can provide the pause function.
In this case, the user has three choices as shown in Table 3-5.
Table 3-5 Displaying functions
Key Function
Ctrl+C Stops the display and running of the command.
Space Continues to display the information on next screen.
Enter Continues to display the information on next line.
3.8 Outputting the Display
3.8.1 Viewing the Display
Do as follows on the router:
Run:
display current-configuration
The current configuration is displayed.
To Next Page
Loading...
Need help?
General
