Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 10 Router Maintenance
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10-9
No. Startup-time reason
01 2007-01-06 09:20:51 Lost power
02 2006-12-30 09:12:27 Lost power
03 2006-12-29 16:51:23 Command
10.5 Configuring the Electronic Label
10.5.1 Establishing the Configuration Task
Applicable Environment
When querying for the electronic label information of all boards including the optical module
and individual entity on the chassis, or backing up the electronic label information to a
specified FTP server, you need to configure the electronic label function.
Pre-configuration Tasks
None.
Data Preparation
None.
Configuration Procedures
No. Procedure
1 Querying the Electronic Label
2 Backing Up the Electronic Label
10.5.2 Querying the Electronic Label
Run:
display elabel [ slot-id ]
The electronic label is queried.
10.5.3 Backing Up the Electronic Label
Do as follows on the router whose electronic label to be backuped.
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
backup elabel ftp host filename username password [ slot-id ]
To Next Page
Need help?
General
