Table 47. Feature code and part number for varying lengths of the cable
Cable length 1 m (3.28 ft) 3 m (9.84 ft) 5 m (16.4 ft)
Feature code EN01 EN02 EN03
CCIN EF01 EF02 EF03
Part number 46K6182 46K6183 46K6184
Related tasks:
Installing PCI adapters
Related reference:
IBM Prerequisite website
Parts information
PCI adapter placement
“Backplane daughter cards and RAID enablement cards” on page 2
Find links to topics that cover Backplane daughter cards and RAID enablement cards.
PCIe2 LP 2x10Gb FCoE 2x1GbE SFP+ Adapter (FC EN0J; CCIN 2B93)
Learn about the specifications and operating system requirements for the feature code (FC) EN0J
adapters.
Overview
The PCIe2 LP 2x10Gb FCoE 2x1GbE SFP+ Adapter is a PCI Express (PCIe) generation 2, low-profile
capable adapter. The adapter has four-ports and is a Fibre Channel over Ethernet (FCoE) converged
network adapter (CNA). This adapter provides a PCIe 2.0 host bus interface. The adapter is a
high-performance adapter that consolidates traffic for networking and Fibre Channel storage. The adapter
is optimized for cloud computing, virtualization, storage, and other data center applications. Both FCoE
and network interface controller (NIC) functions are available for both FCoE ports. Use of the FCoE
requires that you use convergence enhanced Ethernet (CEE) switches. The link aggregation and failover
features of the adapter make it suitable for critical network applications that require redundancy and
high availability.
The four-port adapter provides two 10 Gb FCoE SR small form-factor pluggable (SFP+) ports and two 1
Gb RJ45 Ethernet ports. The two 10 Gb FCoE ports are connected by little connector-type (LC) connectors.
Figure 49. Top and bottom view of the cable
152 Power Systems: Managing PCI adapters for the IBM Power 710 Express or the IBM Power 730 Express
To Next Page
Loading...
Need help?
General