v AIX
– AIX 6.1 with the 6100-09 Technology Level and Service Pack 3 and APAR IV56366, or later
– AIX 7.1 with the 7100-03 Technology Level and Service Pack 3 and APAR IV56367, or later
– AIX 7.1 with the 7100-01 Technology Level and Service Pack 10, or later
– AIX 7.1 with the 7100-02 Technology Level and Service Pack 5, or later
– AIX 6.1 with the 6100-07 Technology Level and service Pack 10, or later
– AIX 6.1 with the 6100-08 Technology Level and service Pack 5, or later
v Linux
– SUSE Linux Enterprise Server Version 11 Service Pack 3, or later, with current maintenance updates
available from SUSE
– Red Hat Enterprise Linux Version 6.5, or later, with current maintenance updates available from Red
Hat
– Red Hat Enterprise Linux Version 7, or later, with current maintenance updates available from Red
Hat
– For support details, see the Linux Alert website (www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.htm)
v IBM i supported through VIOS
v VIOS
– VIOS 2.2.3.3 with ifix IV56366, or later
– VIOS 2.2.2.5, or later
– VIOS 2.2.1.9, or later
This adapter requires the following drivers:
v Linux: bnx2x driver
v The latest version of the device driver or iprutils can be downloaded from IBM Service and
Productivity Tools website (http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/
home.html).
Related tasks:
Installing PCI adapters
Related reference:
IBM Prerequisite website
Parts information
PCI adapter placement
“Backplane daughter cards and RAID enablement cards” on page 2
Find links to topics that cover Backplane daughter cards and RAID enablement cards.
PCIe3 RAID SAS quad-port 6 Gb Adapter (FC EJ0J; CCIN 57B4)
Learn about the specifications and operating system requirements for the feature code (FC) EJ0J adapter.
Overview
The PCIe3 RAID SAS quad-port 6 Gb Adapter is a PCI Express (PCIe), generation 3, RAID SAS adapter
that has a low-profile, short-form factor, but packaged for full height installation. The adapter is used in
high-performance and high-density, serial attached SCSI (SAS) applications. It supports the attachment of
SAS disk and SAS tape by using four mini SAS high-density (HD) x4 connectors that allow the physical
links to be used in various narrow and wide-port configurations. SAS tape attachment is only supported
in a single adapter configuration and cannot be mixed with SAS disk on the same adapter. The adapter
does not have write cache. Figure 23 on page 65 shows the PCIe3 RAID SAS quad-port 6 Gb Adapter.
64 Power Systems: Managing PCI adapters for the IBM Power 710 Express or the IBM Power 730 Express
To Next Page
Loading...
Need help?
General