For information about the fields that are displayed in the output, see “The rs_info utility fields” on page
207.
Running the rs_info utility in a Linux system or Linux virtual machine:
Learn to run the rs_info utility in a Linux system or Linux virtual machine and understand the output.
The rs_info utility can be run on the PCIe Flash Storage adapters that are available in the Linux
operating system or Linux logical partition, but do not work on defined storage adapters.
To identify the available storage adapters and then run the rs_info utility, complete the following steps:
1. Log in as root user.
2. Run the following command:
/usr/bin/rs_info
An output similar to the following screen is displayed:
# /usr/bin/rs_info
Please choose from the following or ’all’:
1) /dev/rsxx0
2) /dev/rsxx1
?
3. Select the number that is associated with the disk for which you want to run the rs_info utility, or
enter all if you want to select all the IBM Flash Adapters that are available to the system. An output
similar to the following screen is displayed:
Managing PCI adapters 205
To Next Page
Loading...
Need help?
General