Icom i2730A User Manual

New2001
9
New2001New2001
MENU MODE
2
The MENU mode is used to program infrequently changed
values or function settings.
•TheMENUmodeitemsarefortheMAINband.
■ MENU mode screen
The MENU item is displayed on the left side.
The item’s option or value is displayed on the right side.
MENU item
Option or
Value
■ MENU mode construction
The MENU mode is constructed in a tree structure.
You can go to the next tree level, or go back a level by pushing
[CLR]D, [ï]D, [Ω]D or [≈]D. (p. 11)
S
ide
S
ide
D
isplay
C
enter
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display
EXMENU
MOD.TS
MODE
TS 5.0~50.0/AUTO
FM/FM-N/AM/AM-N
DUP.T
TONE
0.000~59.995
67.0~254.1
67.0~254.1
023~754
BOTH N/TN-RR/TR-RN/BOTH R
OFFSET
R TONE
C TONE
TBURST
CODE
DTCS-P
OFF/ON
SCAN
PRIO
PAUSE
RESUME
TEMP
P-SKIP
B-LINK
P-EDGE
P-LINK
PLINK0~9
LINK/NAME/ADD/CLEAR
PROG00~24 NAME/FREQ L/FREQ H/
TS/MODE/WRITE
BANK-A~J
5MIN/10MIN/15MIN
0SEC/1~5SEC/HOLD
2~20SEC/HOLD
OFF/ON/BELL
OFF/ON
OFF/ON
OFF/TONE/TSQL /TSQL/DTCS /
DTCS/TSQL-R/DTCS-R/DTC.OFF/
TON.DTC/DTC.TSQ/TON.TSQ
WX-ALT OFF/ON
BOTH N/TN-RR/TR-RN/BOTH R
PAUSE
MENU
TONE
0.000~59.995
67.0~254.1
67.0~254.1
023~754
1~4
OFF/ON/BELL
2~20SEC/HOLD
0SEC/1~5SEC/HOLD
FM/FM-N, AM/AM-N
5.0~50.0/AUTO
OFFSET
R TONE
C TONE
CODE
DTCS-P
TS
LIGHT
PRIO
RESUME
MODE
HOMECH
EXMENU EXMENU construction is shown to the right.
SET.FRQ, SET CH/CLEAR
OFF/TONE/TSQL /TSQL/DTCS /DTCS/
TSQL-R/DTCS-R/DTC.OFF/TON.DTC/DTC.
TSQ/TON.TSQ
OFF/ON
WX-ALT

Icom i2730A Specifications

General

Brand	Icom
Model	i2730A
Category	Transceiver
Language	English