Icom i2730A User Manual

New2001
32
4
MEMORY OPERATION
New2001
4
MEMORY OPERATION
■ Setting a Memory bank
The transceiver has a total of 10 banks (A to J).
You can assign regular Memory channels 0 to 999 to any
desired bank for easy memory management.
You can assign up to 100 channels to a bank.
It is convenient that you categorize the Memory bank, accord-
ing to the Memory channel category or your purpose.
You can use the Memory bank scan to scan the memory
channels in the selected bank. (p. 43)
•TheoperationsarefortheMAINband.
NOTE: The memory banks are only used to hold memory
channels. Thus if the original memory channel content has
been changed, the memory bank content is also changed
at the same time.
For your reference:
To cancel your entry before assigning to or writing into
a Memory bank.
After entering, push [ q Ω]D or [CLR]D.
 •Displaysthe“CANCEL?.”
w Rotate [DIAL]S to select “YES.”
Push [ e ï]D.
D Assigning a Memory channel to a Memory bank
Select the Memory channel to be assigned to a bank. q
(p. 29)
Push [MW] w C to display the Memory entry screen.
Rotate [DIAL] e
S to select “EDIT.”
Push [ r ï]D.
Rotate [DIAL] t
S to select “BANK.”
Push [ y ï]D.
Rotate [DIAL] u
S to select a desired bank group, “A” to “J.”
Select
Push [ i ï]D.
Rotate [DIAL] o
S to select “WRITE.”
!0 Push [ï]D.
 •Displays“OVERW?.”
!1 Rotate [DIAL]S to select “YES.”
!2 Push [ï]D.
 •Beepssound.
 •Assignstheselectedmemorychanneltothebank.

Icom i2730A Specifications

General

Brand	Icom
Model	i2730A
Category	Transceiver
Language	English