Icom i2730A User Manual

73
11
Bluetooth
®
OPERATION
New2001 New2001
New2001
■ Pairing with a headset
This section describes how to pair with a Bluetooth
®
headset.
Turning ON Bluetooth1.
®
of the transceiver
Push [MENU q
]C.
 •EnterstheMENUmode.
w Rotate [DIAL]S to select “BT” ( Bluetooth
®
).
(MENU-EXMENU > EXMEN-BT SET > BTSET-BT)
Push [ e ï]D.
 •Goestothenexttreelevel.
Rotate [DIAL] r S to select “ON.”
Push [ t ï]D.
Entering the pairing mode of the VS-32.
•SeetheVS-3’sinstructionmanualfordetails.
Entering the pairing mode of the transceiver3.
y Rotate [DIAL]S to select “PAIR” (Paring).
(MENU-EXMENU > EXMEN-BT SET > BTSET-PAIR)
Push [ u ï]D.
 •“PAIRING”blinks,andpairingstarts.
 •Whileconnecting,“CONNECTING”blinks.
 •After the connecting to the headset, “CONNECTED” is dis-
played.
Push [MAIN BAND] i S.
 •ExitstheMENUmode.
 •Displays the Bluetooth
®
icon while connected to a Bluetooth
®
headset.
Appears
For your reference:
The “AT CON” (Auto Connect) item is set to ON as the de-
fault, so the transceiver automatically connects to the paired
headset when the headset power is ON. (p. 16)
For your reference:
When the transceiver cannot find any available headset,
and “FAILED” is displayed on the display, push [ï]D to
search again for a headset.
S
ide
S
ide
D
isplay
C
enter
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display

Icom i2730A Specifications

General

Brand	Icom
Model	i2730A
Category	Transceiver
Language	English