IS620P User Manual Preface
- 1 -
Preface
Thank you for purchasing the IS620P series servo drive developed by Inovance Technology
Co., Ltd.
The IS620P series is a high-performance AC servo drive for small and medium power
applications. The IS620P series ranges from 100 W to 7.5 kW. It supports the Modbus
communication protocol with RS232/RS485 communication port, and thus allowing networking
of multiple IS620P drives controlled by a host PC. The IS620P is easy to use with the functions
of rigid table setting, inertia identiîš¿cation and oscillation suppression. It works quietly together
with Inovance ISMH series small/medium-inertia high-response servo motor conîš¿gured with
20-bit incremental encoder. This servo drive is able to realize rapid and accurate position,
speed and torque control, and is applicable for such automation equipment as semiconductor
manufacturing equipment, chip mounter, PCB punching machine, transport machinery, food
processing machinery, machine tool and conveying machinery.
This manual describes the correct use of the IS620P series servo drive, including safety
information, mechanical and electrical installation, commissioning and maintenance. Read
and understand this manual before use. Contact our customer service center if you have any
question during the use.
The instructions are subject to change, without notice, due to product upgrade, speciîš¿cation
modiîš¿cation as well as efforts to increase the accuracy and convenience of the manual.
If you are an equipment manufacturer, forward this manual to the end user.
To Next Page
Loading...
Need help?
General
