Inovance MD500 Series User Manual

9. Technical Data
- 260 -
9
Chapter 9 Technical Data
9.1 EMC
9.1.1 CE Mark
CE mark indicates compliance with European safety and environmental regulations. It is required
for engaging in business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low
Voltage Directive for electronics manufacturers, and EMC guidelines for controlling noise.
This drive is marked with CE mark based on the following EMC guidelines and the Low Voltage
Directive.
● 2014/35/EU: Low Voltage Directive
● 2014/30/EU: Electromagnetic compatibility
Machines and devices used in combination with this drive must also be CE certified and
marked. The integrator who integrates the drive with the CE mark in into other devices has
the responsibility of ensuring compliance with CE standards and verifying that conditions meet
European standards.
9.1.2 CE Low Voltage Directive Compliance
This drive has been tested according to IEC 61800-5-1: 2007, and it complies with the Low
Voltage Directive completely.
To enable machines and devices integrating this drive to comply with the Low Voltage Directive,
be sure to meet the following conditions:
■
Mounting Location
Mount the AC drive in places with pollution not higher than severity 2 and overvoltage
category 3 in accordance with IEC60664.

Inovance MD500 Series Specifications

General

Brand	Inovance
Model	MD500 Series
Category	Inverter
Language	English