Inovance MD500 Series User Manual

4. Operating Panel (Keypad & Display)
- 62 -
4
4.2.3 Function Parameter Operations
■
Viewing Function Parameters
The drive provides three display modes for viewing parameters, described in Table 4-1.
Table 4-1 Function parameter display modes
Function Code Display Mode Parameter Name Setting Range
Base mode
Show all function parameters in
sequence
User-dened quick-view
mode
The user can dene up to 30 function
parameters to include into function
group FE.
User-modied quick-view
mode
The function parameters that have
been modied by a user are shown
here.
Press
QUICK
to cycle through three function parameter display modes. In each mode, the
method you use to view and modify parameter value is the same as shown in
F
i
g
u
r
e
4
-
3
.
Figure 4-5 Switching between three function parameter display modes
Base mode
(all function parameters)
...
...
When
FP-03 = x1
No key operation
within 2s
User-defined mode
(restricted in group FE)
...
User-modified mode
(Modified parameters)
When
FP-03
= 1x
...
QUICK
Default screen
...
Hz
...
QUICK QUICK
QUICK
Enter
Enter
Enter
The value you set for function parameter FP-03 determines whether the operating panel
displays quick-view user-dened and quick-view user-modied function groups. The base
mode is always displayed.
Table 4-2 Setting FP-03 to select quick-view display modes
Value of FP-03 User-modied Group User-dened Group
00 Not displayed Not displayed
01 Not displayed Displayed
10 Displayed Not displayed
11 (default) Displayed Displayed

Inovance MD500 Series Specifications

General

Brand	Inovance
Model	MD500 Series
Category	Inverter
Language	English