APW-194N, 195N, 196N (September, 2003) 1/4
Model name
Sewing speed
Regular stitching
Safety stitching
Back-tack stitching
Kinds of welts
Sewing length (welt length)
Number of patterns that can be
stored in memory
Cycle sewing
Needle gauge
Needle (at the time of delivery)
Needle bar stroke
Thread
Hook
Machine head
Thread take-up
Lubrication
Lubricating oil
Cloth feed system
Bobbin thread remaining amount
detecting device
Power consumption
Compressed air and air consumption
Total weight
Dimensions (excluding the stacker)
Height of table
ORGAN Mt×190 (#16) #16〜#18
SCHMETZ 190R (Nm100) Nm100〜Nm110
34.4mm
2-needle, lockstitch machine with center knife
ORGAN DP×17 (#16) #16〜#18
SCHMETZ SY3335 (Nm100) Nm100〜Nm110
33.4mm
2-needle, lockstitch machine
with organized split needle bar and
center knife
Needle gauge 8〜12mm: 35〜180mm, Needle gauge 14mm or more: 50〜180mm
＊By using the corresponding optional device, sewing length can be set to 18mm or more.
However, for the sewing length of 21mm or less, neither the center knife nor the corner knife can be used.
10 patterns
Possible (max. 5 different patterns can be combined)
8, 10, 12, 14, 16, 18, 20mm
SPUN #50
Vertical-axis full-rotary 1.6 fold-capacity hook
Slide type
By an oiler (machine head and hook)
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
By a servomotor drive
Provided as standard
500W
0.5MPa (5.0kgf/cm
2
), 40N /min
200kg 220kg
735mm (W)×1,250mm (D)×1,200mm (H)
820mm
SPECIFICATIONS
Stitch
length
Fastening
stitching
APW-196N
● Productivity is increased by equipping the machine with a sewing
speed capability of 2,500rpm.
● With its improved material-clamping force during jumping and its
newly adopted fluorocarbon resin coated binder that provides
smoother material feed, the machine can reliably feed garment
bodies and welting patches made of slippery materials to the sewing
position. The result is beautifully finished seams with no slippage
between the garment fabric and welting patch.
● The machine also retains data on ten different patterns, including
data on stitching length, stacker operation, etc. Cycle sewing with
up to five combined patterns can be executed. With this feature,
the machine offers higher productivity in welting on semi-custom-
made garments under one-pattern-one-garment sewing system.
● The machine offers improved welting capabilities and is compactly
designed to allow efficient use in limited production spaces.
● APW-194N
The corner knife intervals can be automatically and accurately
adjusted simply by setting a sewing length on the operation panel,
ensuring that welts are finished with consistent quality at all times.
● APW-195N, APW-196N
When attaching flaps, the flap sensor detects the flap length for the
accurate adjustment of the sewing length and corner knife intervals.
Since the machine produces welts of consistent quality regardless of
the welting length, it can be widely used for the continuous sewing
of welts of different lengths.
● APW-196N
The machine is provided as standard with a turret-
type set of seven pairs of corner knives that can be
quickly selected and switched over in a single-motion.
Sewing of welts requiring different cutting angles and
depths can be easily set to respond to the pattern
invoked on the operation panel.
APW-194N
(Without flap type)
APW-195N
(Flap sewing type)
APW-196N
(Slant pocket sewing type)
Automatic Pocket Welting Machine
APW-194N APW-195N APW-196N
Without flap type Flap sewing type Slant pocket sewing type
Normal 2,500rpm (1,000〜2,500rpm)
Standard: 2.0mm (2.0〜3.4mm)
Standard: 1.0mm (0.5〜1.5mm)
Standard: 2.0mm (1.0〜3.4mm)
Parallel double-welt, parallel single-
welt, parallel variant double-welt
(without flaps)
Parallel double-welt, parallel single-
welt, parallel variant double-welt
(with/without flaps)
Parallel double-welt, parallel single-
welt, slant double-welt, slant single-
welt, trapezoidal stitching
(with/without flaps)
To Next Page
Loading...
Need help?
General
