LH-3126F (September, 2003) 1/2
LH-3126F
Model name
Max. sewing speed
Max. stitch length
Thread take-up
Needle bar stroke
Lift of the presser foot
Hook (selectable)
Needle (at the time of delivery)
Feed system
Lubrication
Lubricating oil
Distance from needle to machine arm
Bed size
Weight of the machine head
LH-3126F
3,000rpm
4mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm
Vertical-axis hook (regular fold), specific latch hook or specific hook with non-rotational bobbin
DP×5 (#10) #9〜#11
Change-over between needle-feed/bottom-feed
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
245mm
517mm×178mm
43kg
● Operating noise of the machine is dramatically reduced.
● The improved opener reduces the impact against the bobbin.
By reducing variations of bobbin thread tension caused by the
opener, irregular stitches are eliminated.
● The strokes of the right and left thread take-up are separately
adjustable.
● The adjustment range of the needle thread tension is widened.
● The machine is equipped with a hook that uses a non-rotational
bobbin.
● Height and inclination of the feed dog can be adjusted.
● Through a simple adjustment of the machine and replacement
of the gauge, the feed method can be changed over between
the needle-feed and bottom-feed types.
LH-3126F
2-needle, Needle-feed/Bottom-feed, Lockstitch Machine
(for foundation)
SPECIFICATIONS
WHEN YOU PLACE ORDERS
Code
B
D
F
G
H
Code
A
B
Code
1
4＊
Code
Z
P
Code
0
1
Code
00
0B
Code
S
C
Attachment
Standard throat plate, standard slide plate,
standard presser foot
Throat plate for tape-attachment, slide plate for
tape-attachment, presser foot for tape-attachment
Combination availability table
Automatic reverse
feed function
0
(not provided)
B
(provided)
Motor＊
Compatible with clutch motor
(without synchronizer and
resistor pack)
Compatible with SC-800 and EC-10B
(with built-in synchronizer and
resistor pack)
Auto-lifter
Not provided
Pedal switch type(AK89)＊
Motor
Where "0" is selected
Where "1" is selected
Where "0" is selected
Where "1" is selected
Clutch motor
○
×
×
×
SC-910
SC-800
×
○
×
○
EC-10B
×
○
×
○
＊For the "Bottom-feed: B,"
only the needle gauges B,
D, and F are applicable.
＊For the above category 4, select the feed category A (needle-feed).
＊For the AK89, select the motor compatibility
category 1 (SC-910, SC-800 or EC-10B).
＊Refer to the combination availability table.
＊Refer to the combination
availability table.
LH3126F
Needle gauge
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
Feed
Needle-feed
Bottom-feed＊
Automatic reverse feed function
Not provided
Provided
Hook
Latch hook
Hook with non-rotational bobbin
To Next Page
Loading...
Need help?
General
