LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 1/4
1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook
[Gauge for standard]
LU-1508NS
LU-1508NH
(for extra heavy materials)
LU-1510N
(with automatic lubricating mechanism)
LU-1510N-7
[Gauge for LU-2200]
LU-1509NS
LU-1509NH
(for extra heavy materials)
LU-1511N-7
WHEN YOU PLACE ORDERS
LU-1510N-7-0BBAA/XC-E500
PSC box Code
For General Single-phase 220〜240V 07
Export 3-phase 200〜220V 11
For JUS(LA)
＊
Single-phase 110〜120V 37
3-phase 220〜240V 38
For CE Single-phase 220〜240V 34
Operation panel Code
Not provided
00000
Operation panel display language: English.
Instruction manual comes in three different languages.
E500B
Operation panel display language: English.
Instruction manual comes in five different languages.
E500C
Motor Code
For General Single-phase
Export 3-phase
200〜240V 60
For JUS(LA)
＊
Single-phase 100〜120V 61
3-phase 200〜240V 62
For CE Single-phase 200〜240V 63
LU1508N LU1510N70BBLU1510N
[Without automatic thread trimmer]
[Without automatic thread trimmer]
Gauge for standard
Gauge for LU-2200
● PSC box/operation panel for SC ● Motor for SC
[With automatic thread trimmer]
[With automatic thread trimmer]
Application Code
For heavy materials
S
For extra heavy materials
H
Application Code
For heavy materials
S
For extra heavy materials
H
＊JUS: North America and Central and South America.
DL device Code
Not provided Z
Provided A
Option Code
Not provided Z
AE-10 (Bobbin thread remaining
amount detecting device)
A
DL device Code
Not provided Z
Provided A
Option Code
Not provided Z
AE-10 (Bobbin thread remaining
amount detecting device)
A
Pneumatic
auto-lifter
Code
Pedal switch type
(AK123B)
B
Pneumatic
auto-lifter
Code
Pedal switch type
(AK123B)
B
SC380 M
LU1509N LU1511N70BB
● The new mechanism with a rectangular feeding motion
promises consistent feed of materials of all thickness without
stitch gathering.
The lower orbit of the feed dog prevents the material from
flopping and reduces operating noise and vibration.
〈Rectangular feed〉LU-1508NS, LU-1510N, LU-1510N-7,
LU-1509NS, LU-1511N-7
Compared with the elliptical feed, the rectangular feed helps
reduces gathered stitches.
〈Complete rectangular feed〉LU-1508NH, LU-1509NH
The locus of the "needle" and "feed" motions are nearly
rectangular. This prevents stitch gathering and provides
efficient feed on multi-layered portions of material.
● With the adoption of a new rectangular feed mechanism, an
alternating vertical movement mechanism, and a unison-
feed mechanism, the machine can feed heavy materials
powerfully and smoothly. Well tensed seams are
consistently produced without pitch errors.
● Even when a heavy material is used, the presser foot lift
does not decrease. This means that the presser foot comes
into contact with the material at exactly the same time that
it does when sewing lighter-weight sections of the material.
As a result, the walking foot retains the material with a
consistent pressure to prevent irregular stitches.
● LU-1508NH, LU-1509NH
•The maximum stitch length is 10mm. The complete
rectangular feed locus enables accurate feed of extra heavy
materials while preventing stitch gathering.
•With its sufficient needle bar stroke of 38mm and long 190R
needle, the machine supports the sewing of extra heavy
materials.
•The machine comes with an extra large steel handwheel with
a diameter as large as φ175.
● LU-1510N, LU-1510N-7, LU-1511N-7
•The machine is equipped with a bottom-feed adjusting
mechanism that adjusts the amount of bottom-feed while
keeping the needle-feed fixed. With the mechanism, the
machine can prevent uneven material feed without changing
stitch pitches.
•Automatic lubricating mechanism improves maintainability.
The machine is provided with a sub oil pan and double filter
to keep dust from entering the oil.
● LU-1510N-7, LU-1511N-7
•The machine comes with JUKI's proven thread trimming
mechanism. With its robust knife and cam configuration,
the thread trimmer reliably cuts threads as thick as #5.
•The vertical strokes of presser foot and walking foot (their
alternating vertical movement) can be easily changed using a
large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with
the set value. With this feature, ideal sewing conditions are
maintained at all times.
(with automatic lubricating mechanism
and automatic thread trimmer)
(with automatic lubricating mechanism
and automatic thread trimmer)
To Next Page
Loading...
Need help?
General
