EasyManuals Logo
Home>Juniper>Gateway>SRX320

Juniper SRX320 User Manual

Juniper SRX320
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Table 51: LED Indications for Hot-Swappable GPIM Components
(continued)
DescriptionComponentNumber
Push the button to turn the GPIM offline. After the STATUS
LED light goes off, it is safe to remove the GPIM from the
services gateway.
ONLINE/OFFLINE
button
2
3. Label the cables connected to the GPIM so that you can later reconnect each cable
to the correct GPIM.
4. Disconnect the cables from the GPIM.
5. If necessary, arrange the cables to prevent them from dislodging or developing stress
points.
6. Using a Phillips (+) screwdriver, loosen the captive screws on each side of the GPIM
faceplate.
7. Grasp the handles on each side of the GPIM faceplate, and slide the GPIM out of the
services gateway.
8. Place the GPIM in an electrostatic bag or on an antistatic mat.
9. If you are not reinstalling a GPIM into an empty slot, install a blank GPIM faceplate in
the empty slot to maintain proper airflow.
NOTE: When installing a blank GPIM faceplate, make sure that the padded
side of the faceplate is facing up.
Installing a Gigabit-Backplane Physical Interface Module
Before you begin:
Ensure that the services gateway is powered off.
Ensure that the GPIM is installed in the appropriate GPIM slot. For information about
the appropriate GPIM slots, see “SRX300 Series and SRX550 High Memory Services
Gateway Gigabit-Backplane Physical Interface Modules Overview” on page 4.
Copyright © 2017, Juniper Networks, Inc.100
SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference

Table of Contents

Other manuals for Juniper SRX320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX320 and is the answer not in the manual?

Juniper SRX320 Specifications

General IconGeneral
Firewall throughput1000 Mbit/s
Number of users50 user(s)
Quality of Service (QoS) supportYes
Mobile VPN IPSec250
IPS/IDS throughput100 Mbit/s
USB 2.0 ports quantity1
Connectivity technologyWired
SFP module slots quantity2
Ethernet LAN (RJ-45) ports6
Internal memory4000 MB
Flash memory8000 MB
Storage media typeFlash
Power consumption (typical)27 W
Heat dissipation157 BTU/h
Concurrent connections64000
Mean time between failures (MTBF)284700 h
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Routing protocolsBGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2
Weight and Dimensions IconWeight and Dimensions
Weight1510 g
Dimensions (WxDxH)299.9 x 43.9 x 191 mm

Related product manuals