Juniper SRX320 User Manual

Table 33: LTE Mini-PIM LED States (continued)
DescriptionLED
Solid green—LTE connection is established.LTE
Blinking green—Connecting to an LTE network.
Solid green—SIM1 is active.SIM1
Solid green—SIM2 is active.SIM2
NOTE: If all the LEDs are blinking, it indicates that firmware updates are in
progress. Do not power off the services gateway before the updates complete.
Related
Documentation
LTE Mini-Physical Interface Module Hardware Specifications on page 43•
LTE Mini-Physical Interface Module Hardware Specifications
Table 34 on page 43 provides the hardware specifications for the LTE Mini-PIM.
Table 34: LTE Mini-PIM Hardware Specifications
ValueDescription
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
Dimensions (H x W x L)
0.23 lb (0.106 kg)Weight
SMAConnector type
Mini-PIMForm factor
32° F through 104° F (0° C through 40° C)Environmental operating temperature
-40° F through 158° F (-40° C through 70° C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
• LTE Mini-Physical Interface Module on page 39
• LTE Mini-Physical Interface Module LEDs on page 42
43Copyright © 2017, Juniper Networks, Inc.
Chapter 7: LTE Mini-Physical Interface Module

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm