23
3
Initial Setup
TV Setup
You now need to select Home mode and choose if to allow access to the built-in Chromecast.
Tuning in your TV
You now need to tune in your TV.
Initial Setup
1. Highlight the Home TV mode then press OK.
2. Select if you would like to allow the built-in Chromecast to be always available
or not then press OK.
Selecting Chromecast ON may increase your TV energy consumption,
you will be prompted if you want to continue or not.
If you View TV Through a Set Top Box
If you have attached a Set top box such as Sky/Virgin or BT via a HDMI
cable then highlight SKIP SCAN and press OK. This will mean your TV will
not try to tune any channels in and will got straight to the Home page. To
view your set top box select the Input that you have connected it to.
1. Make sure your aerial is connected and then highlight AERIAL and press OK.
2. Highlight SCAN then press OK.
3. Your TV will now start to scan for all available TV channels. A video will play
while its scanning.
Make sure you have connected your aerial before tuning in your TV.
To Next Page
Loading...
Need help?
General
