37
5
Customising TV Settings
Customising
TV Setting
Picture Settings Table
The following table show all the available picture setting adjustment on your TV. Not all of these setting apply to all Inputs.
Picture Mode
Your TV has some pre-set picture modes: STANDARD - VIVID - SPORT - MOVIE - GAME. The default setting
is STANDARD. You can also manually adjust the picture by choosing USER.
Auto Backlight
The Auto Backlight setting in set to Eco as default, but it can also be changed to OFF - LOW - MIDDLE -
ECO.
Backlight
To access Backlight you must first switch off Auto Backlight. Increases or decreases the brightness of the
backlight from 0 - 100.
Brightness Increases or decreases the picture brightness from 0 - 100.
Contrast Increases or decreases the picture contrast from 0 - 100.
Colour Increases or decreases the colour from 0 - 100.
HUE Increases or decreases the hue from 0 - 100.
Sharpness Increases or decreases the picture sharpness from 0 - 20.
Gamma Choose from Dark, Middle (standard) or Bright. Highlight your desired setting then press OK.
Colour
Temperature
The colour temperature setting has 4 preset settings USER - COOL - STANDARD - WARM, when selected
each of these settings has individual adjustments. Red, Green and Blue gain can all be adjusted from -100
to 100.
Advanced
Video
Select to have more advanced adjustments to your TVs picture.
DNR (Dynamic
Noise Reduction)
Dynamic Noise Reduction has 5 different setting OFF - LOW - MEDIUM - STRONG
- AUTO. The default setting is MEDIUM. Highlight your desired setting then press
SELECT.
MPEG NR (Noise
Reduction)
MPEG Noise Reduction has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
Adaptive Luma
Control
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
DI Film Mode
DI Film mode has 2 setting AUTO and OFF. The default setting is OFF. Highlight your
desired setting then press SELECT.
Blue Stretch Blue Stretch can be switched ON or OFF.
Game Mode Game Mode can be switched ON or OFF.
PC Mode PC Mode can be switched ON or OFF.
HDMI RGB Range
(HDMI input only)
HDMI RGB Range has 3 different settings AUTO - FULL - LIMIT. The default setting is
AUTO. Highlight your desired setting then press SELECT.
Colour Tuner
Colour Tuner can be switched on and off by selecting ENABLE ON or OFF. Then you have 5 separate
setting that can be individually adjusted. HUE - SATURATION - BRIGHTNESS - OFFSET - GAIN.
11 Point Colour
Correction
This setting enables you to calibrate the white balance of your TV. With 11 Point Colour Correction
enabled, you can adjust Gain from 5% to 100% and also adjust the Red, Green and Blue levels.
Reset to Default Resets all setting to factory default settings.
To Next Page
Loading...
Need help?
General
