60
6
Settings Menu
Picture - Adjust Picture Modes and Settings
To select Picture go to SETTINGS - DEVICE PREFERENCES - PICTURE. Here you'll be able to adjust all the picture modes and picture
setting.
The following table show all the available picture setting adjustment on your TV. Not all of these setting apply to all Inputs.
Picture
Picture Mode
Your TV has some pre-set picture modes: STANDARD - VIVID - SPORT - MOVIE - GAME. The default setting is
STANDARD. You can also manually adjust each mode.
Auto Backlight
Auto backlight is set to Eco as default but can be changed to OFF - LOW - MIDDLE - ECO. Adjusting the
setting may increase your TVs power consumption.
Backlight Increases or decreases the brightness of the backlight from 0 - 100.
Brightness Increases or decreases the picture brightness from 0 - 100.
Contrast Increases or decreases the picture contrast from 0 - 100.
Colour Increases or decreases the colour from 0 - 100.
HUE Increases or decreases the hue from 0 - 100.
Sharpness Increases or decreases the picture sharpness from 0 - 20.
Gamma Choose from Dark, Middle (standard) or Bright. Highlight your desired setting then press OK.
Colour
Temperature
The colour temperature setting has 4 preset settings USER - COOL - STANDARD - WARM, when selected each
of these settings has individual adjustments. Red, Green and Blue gain can all be adjusted from -100 to 100.
Advanced
Video
Select to have more advanced adjustments to your TVs picture.
DNR (Dynamic
Noise Reduction)
Dynamic Noise Reduction has 5 different setting OFF - LOW - MEDIUM - STRONG - AUTO.
The default setting is MEDIUM. Highlight your desired setting then press SELECT.
MPEG NR (Noise
Reduction)
MPEG Noise Reduction has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
Adaptive Luma
Control
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is STRONG. Highlight your desired setting then press SELECT.
Local Contrast
Control
Local Contrast Control has 4 different setting OFF - LOW - MEDIUM - HIGH. The default
setting is STRONG. Highlight your desired setting then press SELECT.
Setting
Menu