To Next Page

To Previous Page

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual

11-240 3700AS-901-01 Rev. D/June 2018

eventlog.next()

This function returns the oldest unread event message from the event log and removes it from the event log.

Type

TSP-Link accessible

Affected by

Where saved

Default value

Function

Yes

Usage

logString = eventlog.next()

logString

The next log entry

Details

Returns the next entry from the event log and removes it from the log.

If there are no entries in the event log, returns the value nil.

Example 1

print(eventlog.next())

Get the oldest message in the event log and remove that entry from the log.

Output:

17:28:22.085 10 Oct 2009, LAN2, 192.168.1.102, LXI, 0, 1192037134, <no time>, 0,

0x0

Example 2

print(eventlog.next())

If you send this command when there is nothing in the event log, you will get the following output:

nil

Also see

eventlog.all() (on page 11-237)

eventlog.clear() (on page 11-238)

eventlog.count (on page 11-238)

eventlog.enable (on page 11-239)

eventlog.overwritemethod (on page 11-241)

Keithley 3721-ST User Manual

Other manuals for Keithley 3721-ST