25
5
5
Features of your vehicle Driver Position Memory System
ing the 1 button recalls the "1" memory
position.
僅 Whilst recalling the stored positions,
pressing one of the control buttons
for the driver's seat, outside rearview
mirror, or instrument panel illumina
-
tion will cause the movement of that
component to stop and move in the
direction that the control button is
pressed.
Driver position memory system
reset
If the Driver position memory system
does not work properly, initialise the sys
-
tem as follows.
How to initialise:
1. Stop the vehicle and open the driver's
door with the ignition switch or
ENGINE START/STOP button in the
ON position and the vehicle shifted to
P (Park).
2. Pull the driver's seat forward as far as
possible and have the seatback
upright as much as possible using the
driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat forward
movement switch for 2 seconds
simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will automati
-
cally move backwards. The alarm
sound will continue whilst the system
is in operation.
3. Initialization will be complete after the
seat and seatback move to the centre
with an alarm sound. If, however,
cases as follows occur, the initializa
-
tion process will come to a stop and
the alarm sound will stop as well.
僅 When pushing driving position mem
-
ory system button
僅 When pushing driver's seat height
adjustment switch
僅 When shifting from P (Park) to other
positions
僅 When driving speed exceeds 3 km/h
僅 When the driver's door is closed
Easy access function (if
equipped)
The system will move the driver's seat
automatically as follows:
Without smart key system
僅 It will move the driver's seat rearward
when the ignition key is removed and
the driver's door is opened.
僅 It will move the driver's seat forward
when the ignition switch is in the ACC
or ON position.
With smart key system
僅 It will move the driver's seat rearward
when the ENGINE START/STOP but
-
ton is in the OFF position and the
driver's door is opened.
僅 It will move the driver's seat forward
when the vehicle is turned ON or the
driver's door is closed with the smart
key with you.
You can activate or deactivate the Easy
Access Function from the User Settings
Mode on the LCD display. For more
details, refer to "LCD display" on page 5-
69. If your vehicle is equipped with addi
-
tional navigation, please refer to the
infotainment system manual separately
supplied.
To Next Page
Loading...
Need help?
General
