Driving your vehicle
1226
Smart Cruise Control (SCC)
The front view camera and front radar
are used as a detecting sensor to detect
front vehicles.
Refer to the picture above for the
detailed location of the detecting sensor.
Always keep the front view camera and
front radar in good condition to maintain
optimal performance of Smart Cruise
Control. For more details on the precau
-
tions of the front view camera and front
radar, refer to "Forward Collision-Avoid
-
ance Assist (FCA) (Sensor fusion) (if
equipped)" on page 6-64.
Smart Cruise Control settings
Turning on Smart Cruise Control
僅 Press the Driving Assist ( )
button to turn on the function. The
speed will be set to the current speed
on the cluster.
僅 If there is no vehicle in front of you,
the set speed will be maintained, but if
there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead. If the
vehicle ahead accelerates, your vehi
-
cle will travel at a steady cruising
speed after accelerating to the set
speed.
If your vehicle speed is between 0 ~ 30
km/h (0 ~ 20 mph) when you press the
Driving Assist ( ) button, the
Smart Cruise Control speed will be set to
30 km/h (20 mph).
Setting vehicle distance
Each time the Vehicle Distance button is
pressed, the vehicle distance changes as
follows:
僅 If you drive at 90 km/h (56 mph), the
distance is maintained as follows:
Distance 4 - approximately 52.5 m
(172 ft.)
Distance 3 - approximately 40 m (130
ft.)
Distance 2 - approximately 32.5 m
(106 ft.)
Distance 1 - approximately 25 m (82
ft.)
To Next Page
Loading...
Need help?
General
