Features of your vehicle
1465
Windscreen defrosting and defogging
Defogging inside windscreen
1. Set the fan speed to the desired posi
-
tion.
2. Select desired temperature.
3. Press the defroster button ( ).
4. The outside (fresh) air position will be
selected automatically and the air
conditioning will turn on according to
the detected ambient temperature.
If the air conditioning and outside (fresh)
air position are not selected automati
-
cally, adjust the corresponding button
manually. If the position is
selected, lower fan speed is adjusted to
a higher fan speed.
Defrosting outside windscreen
1. Set the fan speed to the highest posi
-
tion.
2. Set the temperature to the extreme
hot (HI) position.
3. Press the defroster button ( ).
4. The outside (fresh) air position will be
selected automatically and the air
conditioning will turn on according to
the detected ambient temperature.
Auto defogging system
Auto defogging helps reduce the possi
-
bility of fogging up the inside of the
windscreen by automatically sensing the
moisture on inside the windscreen.
The auto defogging system oper
-
ates when the heater or air condi
-
tioning is on.
When the Auto Defogging System oper
-
ates, the indicator will appear.
If a high amount of humidity is detected
in the vehicle, the Auto Defogging Sys
-
tem will be enabled.
The following steps will be performed
automatically:
1. The A/C button will turn ON.
2. The air intake control will change to
Fresh mode under low outside tem
-
perature.
To Next Page
Loading...
Need help?
General
