Driving your vehicle
1186
Cruise Control (CC)
Blind-Spot View Monitor mal
-
function
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display normally, have the vehicle
inspected by a professional workshop.
Kia recommends visiting an authorised
Kia dealer/service partner.
Cruise Control (CC) (if
equipped)
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at
speeds above 30 km/h (20 mph) without
depressing the accelerator pedal.
During normal Cruise Control operation,
when the - switch is activated or reacti
-
vated after applying the brakes, Cruise
Control will energise after approximately
3 seconds. This delay is normal.
To activate Cruise Control, depress the
brake pedal at least once after turning
the ignition switch or ENGINE START/
STOP button to the ON position or start
-
ing the engine.
Misuse of Cruise Control
Do not use Cruise Control if the traffic
situation does not allow you to drive
safely at a constant speed and with suf
-
ficient distance to the vehicle in front.
To Next Page
Loading...
Need help?
General
