Maintenance
688
Light bulbs
Type B
If the head lamp LED (1,2), daytime run
-
ning lamp LED (3) and turn signal lamp
LED (4) does not operate, have your
vehicle checked by a professional work
-
shop. Kia recommends to visit an autho
-
rised Kia dealer/service partner.
Replacing front turn signal lamp
(Bulb type)
1. Turn off vehicle and disconnect the (-)
battery terminal from the battery.
2. Remove the socket (A) from the
assembly by turning the socket coun
-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
3. Remove the bulb (B) from the socket
(A) by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
6. Connect the (-) battery terminal from
the battery.
Replacing front fog lamp (LED
type)
To Next Page
Loading...
Need help?
General
