Maintenance
728
Light bulbs
6. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
9. Connect the rear back up lamp con
-
nector.
10.Tighten the plastic retaining screws.
11.Install the plastic tabs and the under
panel cover.
Replacing rear fog lamp (LED
type)
If the rear fog lamp (1) does not operate,
have your vehicle checked by a profes
-
sional workshop. Kia recommends to
visit an authorised Kia dealer/service
partner. The LED lamp cannot be
replaced as a single unit because it is an
integrated unit. The LED lamp has to be
replaced with the unit. A skilled techni
-
cian should check or repair the stop and
tail lamp (LED), for it may damage
related parts of the vehicle.
Replacing high mounted stop
lamp (LED type)
If the high mounted stop lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
To Next Page
Loading...
Need help?
General
