119
6
6
Driving your vehicle Cruise Control (CC)
Cruise Control operation
Setting speed
1. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
2. Press the Driving Assist ( )
button at the desired speed. The set
speed and Cruise ( ) indica
-
tor will appear on the cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
On a steep slope, the vehicle may
slightly slow down or speed up whilst
driving uphill or downhill.
Increasing speed
僅 Push the + switch up and release it
immediately. The cruising speed will
increase by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push the + switch up and hold it whilst
monitoring the set speed on the clus
-
ter. The cruising speed will increase to
the nearest multiple of ten at first, and
then increase by 10 km/h (5 mph)
each time the switch is operated in
this manner.
Release the switch when the desired
speed is shown and the vehicle will
accelerate to that speed.
Decreasing speed
僅 Push the - switch down and release it
immediately. The cruising speed will
To Next Page
Loading...
Need help?
General
