Features of your vehicle
1225
Lighting
Also, the rear fog lights turn on when the
rear fog light switch is turned on after
the front fog light switch (if equipped) is
turned on and the headlight switch is in
the parklight position.
To turn the rear fog lights off:
僅 Turn the rear fog light switch to the on
position again.
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that auto
-
matically adjusts the headlamp range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con
-
ditions.
Detecting sensor
Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness whilst driving. Refer to
the picture above for the detailed loca
-
tion of the detecting sensor.
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
僅 For more details on the precautions of
the front view camera, refer to"For
-
ward Collision-Avoidance Assist (FCA)
(Front view camera only) (if
equipped)" on page 6-53.
High Beam Assist setting
With the ENGINE START/STOP button in
the ON position, select 'Lights → High
Beam Assist (or HBA (High Beam
Assist))' from the Settings menu to turn
on High Beam Assist function.
For your safety, change the Settings
after parking the vehicle at a safe loca
-
tion.
To Next Page
Loading...
Need help?
General
