103
6
6
Driving your vehicle Manual Speed Limit Assist (MSLA)
The speed limit indicator light will
appear on the cluster.
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of
five (multiple of ten in km/h) at first,
and then increase or decrease by 10
km/h (5 mph).
3. The set speed limit will be displayed
on the cluster. The set speed limit will
blink and chime will sound until you
return the vehicle speed within the
speed limit.
When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
Temporarily pausing Manual
Speed Limit Assist
Press the ( ) switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
indicator will stay on.
To Next Page
Loading...
Need help?
General
