119
5
5
Features of your vehicle Lighting
Head light (Low Beam)
When the light switch is in the head light
position, head light (low beam), tail,
license light will turn ON.
The ignition switch or ENGINE START/
STOP button must be in the ON position
to turn on the headlights.
Auto light
When the light switch is in the AUTO
light position, the taillights and head
-
lights will turn ON or OFF automatically
depending on the amount of light out
-
side the vehicle.
僅 Never place anything over the sensor
(1) located on the instrument panel as
this will ensure better auto-light sys
-
tem control.
僅 Don't clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windscreen, the Auto light sys
-
tem may not work properly.
Operating high beam
To Next Page
Loading...
Need help?
General
