13
4
4
Safety features of your vehicle Seat
Rear seat adjustment
Forward and backward (2nd row
seat)
To move the seat forward or backward:
1. Pull the seat slide adjustment lever up
and hold it.
2. Slide the seat to the position you
desire.
3. Release the lever and make sure the
seat is locked in place.
Adjust the seat before driving, and make
sure the seat is locked securely by trying
to move forward and backward without
using the lever. If the seat moves, it is
not locked properly.
Seatback angle (2nd row seat)
To recline the seatback:
1. Pull up the seatback recline lever.
2. Hold the lever and adjust the seat
-
back of the seat to the position you
desire.
3. Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)
Walk-in seat (2nd row seat, for 6/
7 passenger vehicle)
To get in or out of the 3rd row seat:
1. Routing the seat belt webbing
through the rear seat belt guide clip.
After inserting the seat belt, tighten
the belt webbing by pulling it up.
2. Press the switch (1) on the top of the
2nd row seat or press the switch (2)
on the bottom of the 2nd row seat to
unlock.
To Next Page
Loading...
Need help?
General
